Rubber And Plastic Testing Instruments

Product Details:

Specification:

• Minimum diameter of the test specimen support disc-100 mm
• Rotation Speed of the Disc: 60±2 rpm
• Center to center distance b/w disc and Abrasive wheel-19.1 mm
• Thickness of the Abrasive Wheel: 12.7±0.1 mm
• External Diameter of the Disc: 51.6 ±0.1 mm
• Motor: ¼ HP single hp, 220V AC, induction motor
• Gear Box: Worm reduction gear box

Product Details:

Specification:

• No of Cells: 01, 04, 06, 09, 12 (As per customer’s requirement)
• Inner Cell made of aluminum
• Diameter of Inner Cell 100 mm
• Length of Inner Cell 300 mm
• Microprocessor based digital temperature Controller (PID)
• Temperature range : ambient to 250 deg.C with accuracy of 1 deg.C
• Individual temperature Controller & Air inlet for all the chambers
• The casing consists of mild steel, painted with powder coated paint
• Solid state relay for safe control
• Flow meters with needle valves, for setting the air exchange rate
• Cooling channels in the casing for low surface temperature
• Temperature controlled cooling fan for the electronics cabinet
• Run-time meter (Hour Totalizer)

Product Details:

Transparency Tester is mainly used for ensuring the best quality of the products by testing their transparency level by measuring the light that the materials allow to pass through them.

Product Details:

We are prominent Manufacturer and Supplier firm that has gained huge acceptance for its offered next generation Testing Equipment

Product Details:

Specification:

• No of Cells: 01, 04, 06, 09, 12 (As per customer’s requirement)
• Inner Cell made of aluminum
• Diameter of Inner Cell 100 mm
• Length of Inner Cell 300 mm
• Microprocessor based digital temperature Controller (PID)
• Temperature Range: ambient to 250 deg.C with accuracy of 1 deg.C
• Individual temperature Controller & Air inlet for all the chambers
• The casing consists of mild steel, painted with powder coated paint
• Solid state relay for safe control
• Flow meters with needle valves, for setting the air exchange rate
• Cooling channels in the casing for low surface temperature
• Temperature controlled cooling fan for the electronics cabinet
• Run-time meter (Hour Totalizer)

 

Related Standards:

• ABS 903 Part A19, BS 6746 (1976),
• It confirms to IS 3400 (Part IV) 1978
• ASTM D 573

Product Details:

Melt Flow Index Tester is fitted with a Microprocessor based PID Temperature controller, with a temperature range from ambient to 400 deg.C. It has a resolution of 0.1 deg.C and an accuracy of ± 0.1deg.C. The instrument incorporates a digital presettable timer with a range of up to 59 minutes; 59 seconds and buzzer output. The provision of automatic sample cutting ensures the accuracy and smooth operation.

 

Melt Flow Index

• Temperature Range: 400 Deg.C
• DIE : 1 mm, 1.5 mm and 2mm
• Shaft Dia: 9.5 mm
• Dead Weight: 2 kg and 5 kg
• PID Control
• Digital timer
• Supply: AC 220 V, Single Phase
• Wattage: 500W

Product Details:

We are prominent Manufacturer and Supplier firm that has gained huge acceptance for its offered next generation Testing Equipment

Product Details:

We are prominent Manufacturer and Supplier firm that has gained huge acceptance for its offered next generation Testing Equipment

Product Details:

We are Manufacturer of Rubber Tensile Strength Tester.

Specifications:

• The Capacity of Tester: 500 Kg. (Accuracy : 100gm)
• S Type Load Cell fixed with Top Grip
• Traverse Speed: 300 & 500 mm/min or 100 & 300 mm /min. (Adjustable)
• Variable Speed Models are also available
• Max. Grip Separation: 1000 mm
• Min. Grip Separation: 25 mm

Product Details:

We are prominent Manufacturer and Supplier firm that has gained huge acceptance for its offered next generation Testing Equipment

Product Details:

Taber Abrading Wheels H18 is used for abraion testing of Cement products, Tiles, Ceramic plates, Granite and Glass surface. This wheel is made by Taber Industries USA.Other ProductsCS10CS17H18H10H22
CS0 (S-32)S-42S-33

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Corrugated Box

Product Details:

De-Mattia Flex Tester: Introduction

De-mattia Flex tester is used for checking the resistance of vulcanized rubber or synthetic elastomers to cut growth. The rubber materials forms crack when subjected to repeat flexing or bending under specified conditions continuously. Cracks develops in part of surface where stress is developed during flexing or if part initially contains cracks to extend in direction perpendicular to the stress. 
Specification: 

•  Flexing Angle :1800 ± 20
•  Operating Frequency : 300 ±10 cycle/min
•  No. of Test specimens : 4 Sample
•  Counter : 6 Digit, Pre-Set able
•  Motor : ½ HP
•  Power : Power 220V , Single phase
•  Material : Mild Steel
•  Finish : Powder coated & Nickel/Chrome Plated
•  User friendly design.
•  Supplied with User manual and Calibration certificate.

Related Standards:
ASTM D430-2012, ASTM D813-2014, IS 3400(Part-7), ISO 3400(Part-8)-2012

Request Callback

Additional Information:

• Item Code: DMF700
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100 Machines per Month
• Delivery Time: 7 days
• Packaging Details: Wooden Box

Product Details:

The wheels are a proprietary formulation developed and designed by Taber Industries so the binder material breaks down during use, exposing and creating a new abrading surface.