Textile Testing Equipments

• Inclined viewing plate of 45⁰ angles is supplied along with machine
• All tube lights are operated separately by Electronic Ballast for instant start, power saving and to prevent tube lights
• Control panel is ergonomically designed for easy operation
• All tube lights are made in Holland or Thailand
• German make hour meter is used for totalizing uses of D-65 tube light
• All Tube Lights are made in Holland / Thailand / USA

• D-65: Artificial Day Light
• CWF: Cool White Fluorescent (Office Lighting)
• TL-84: Triphosphor Fluorescent Lamp (Show room Light)
• TL-83: Triphosphor Fluorescent Lamp (Show room light for European Buyers)
• UV: Ultra Violet Light
• Tungsten Filament : Incandescent Light
• Related Standards: ISO 3664, ASTM D1729, JIS Z 8723

• No. of Heads: 4
• Working Pressure on Test Specimen: 3 KPA, 6KPA, 9KPA and 12 KPA (4 Nos each)
• Exposed area of Test Specimen: 6.45 cm²
• Maximum Available Pressure: 12 KPA (790 gms)
• Rotational Speed of Outer Peg: 48 ± 2 RPM
• Drive (Speed) Ratio of Outer and Inner Peg: 32:34
• Total Stroke of Outer and Inner Peg: 24 mm
• Pilling: 60 mm for Abrasion
• Power Supply: 230 V AC 50 Hz
• Power Consumption: 0.2 KWH
• Related Standards: ISO 5470, BS 3424, 5690, JIS L 1096, ASTM 4966 / 4970-99, DIN 53863, 53865, SFS 4328

• Timer: 1 ~ 249s, automatically stops heating and alarms
• Pressure: 1kPa
• Weight: 35Kg
• Dimensions: 520 x 440 x 350 mm(LxWxH)
• Temp. Range: R.T. ~ 240
• Temp. Accuracy: +/- 2 Deg. C

• Double-walled structure filled with glass wool insulation
• Inner Chamber made of Stainless Steel and outside body is made of mild steel powder coated
• Fully SS models are also available
• Two adjustable perforated shelves for keeping the samples
• The chamber is heated with air circulating fan with heater
• The chamber is cooled electrically with the help of compressor cooling coils placed in ribs on the side of chamber
• Temperature controlled by Digital Temperature Indicator and Controller
• Humidity controlled by digital humidity controller
• Transparent viewing window to see the samples
• Light arrangement inside chamber to see the samples
• Push type door locking system
• Power 220 Volt AC 50 Hz. Single Phase
• Related Standards: ASTM D 1776 - 04

• With 8 Nos. Pilling Tubes
• With Digital Display with 5 digit pre-set counter
• With Digital Pre-set Counter
• With Template for Sample Cutting
• Thickness of cork lining 3 mm
• ¼ HP Geared Motor 220V / 50 Hz
• Rotation of Boxes: 60RPM
• Size of Wooden Box: 225 mm x 225 mm x 225 mm
• Size of Test Specimen: 125 x 125 mm
• Related Standards: BS 5

• Stainless Steel Body with fine quality acrylic door
• Flame Source - L.P.Gas
• Flexible Tubing – 1.5 meter
• Specimen Holder receiver tray position – 45⁰ Angle
• Multipurpose gauge to measure flame length
• Flame Length – 16 mm
• Specimen cutting template size – 500 mm x 150 mm
• With Digital Timer
• Size of Specimen Holder – 175 mm x 80 mm
• Burning Area – 105 mm x 40 mm
• Related Standards: ASTM D 1230, CRF 16-1610, FTMS 191-5908

• TEXCARE^TM Traverse Thread Counter
• Microscope Magnification: 10 X Zoom
• Fabric Can be Checked for: ¼ Inch, ½ Inch, 1 Inch or 20 mm, 50 mm
• 4 Digit digital (Registers each increment with a beep)
• Counter Range: 0 to 9999
• Related Standards: ISO 7211, ASTM D3775-98, IS 1963-1981

Additional Information:

• Item Code: TC700

• RPM of Sample Holder: 5± 1
• Angle between Horizontal and plane of the sample
• Center of the sample holder to the vertical axis of rotation the sample holder assembly-105± 10 mm
• No. of Jets Mounted: 304
• Center to Center Distance Between Jets: 20 mm
• Water Collected Per Holder: 65 ml / min
• Vertical distance between center of the specimen when fixed in a position at which the drops are released to the bottom of the jets: 1500 ± 10 mm
• Exposed Diameter of the Sample: 100 mm
• Length of the Base of the Wiper Assembly: 96 mm
• Radius of the Objective Surface of the Wiper Assembly: 6.35 mm
• Thickness of the Wiper Surface: 5.1 mm
• As per standards: IS 392-1989

• Capacity: up to 1000 Kg
• Max. Traverse: 900 mm
• Min. Traverse: 25 mm
• Elongation Measurement: Digital
• Power: 220V / AC 50 Hz
• Heavy-duty Motor with Reduction Gear Box
• Self Tightening Grip
• Peak Hold Memory
• Traverse Speed 50/150 of 100 / 300 mm/min

• This Portable Colour Matching Cabinet has imported tube lights of 1 feet length, D-65, TL-84, CWF, Ultra Violet, FL are fitted in standard model, Other lights like TL-83, U-35, U-3, Illuminant A
• D-50 lights can be added as per customers requirement. All Tube lights are imported. made in USA, Canada, Holland, Thailand & France
• This machine is portable and light weight, High-Quality Power Coated Body, Rust Free

Specifications:

• Capacity: 4 Liter per Hour
• Fully Stainless Steel Model
• 2 Nos Copper Immersion Heaters
• Wall Mounted
• Suitable for all types of Laboratories